Test Panel
Test Panels are ideal penetrant sensitivity comparators. Having matched pairs enables studies of the effects of process changes as compared to a standard process, or used material changes vs fresh material. Test panels allow “in use penetrants to be compared against “new, unused” product to determine if the penetrant is performing properly.
Category
- Type 1: ISO 3452-3 JIS Z 2343-3
Twin Type: 2 mm thickness Crack depth:10, 20, 30,and50μm Material:BrasswithNi-Crcoating
- Type 2: ISO 3452-3 JIS Z 2343-3
Havingtwofunctions, crackandroughness Material:Stainlesswith Ni-Cr coating
- Type 3: AMS 2644 JIS Z 2343-3
24S aluminum quenching crack test panel Material: Aluminum
- ASME Type: ASME Sec. 5 Art. 6
TwinType:10mmthickness Material:Aluminum
Sensitivity Level Type 1
| Crack Depth | Level |
| 50μm | 1, 2, 3, 4 |
| 30μm | 2, 3, 4 |
| 20μm | 3, 4 |
| 10μm | 4 |
Type 3
| Crack Depth | Level |
| Approx. 100 | 1 |
How to use Test Panels
- Test Panels are used for penetrant-effectiveness testingandjudgmentoftesting process.
- ASME Type is used in principle as a pair of test panels separatedto twoportions bytheslit (center line). And the test panel also can be used by cutting-off to twopanels.
- Regarding to the penetrant-effectiveness testing, two kinds of penetrant materials to be compared shall be respectively applied to the pair of test panels separated by the center slit. And tested underthesameconditionforthe comparisonofthe effectiveness.
- For the judgment of testing process, the same penetrantmaterial shall be applied to the two test panels, and tested respectively by the different processfor thecomparisonof the testingprocess.
- One test panel should be used in common for testing of dye penetrant suspension and testing of fluorescent penetrant suspension.